Cost of water softener installation
A water softener plant can provide a solution for many problems for anyone living in an area with hard water. Hard water consumes your machines, your soap product use and your heating costs. Not to mention the attack in your bathroom or sanitary. To remain the boss, you will have to invest a lot in descaling agents. These resources are not only pricey but also bad for the environment. Installing a water softener can remove all these problems. Here you can read about the costs of this installation, about the many benefits associated with a water softener and how you can keep these costs as low as possible.
What is a water softener?
A water softener works with a filter that is filled with resin pellets. As the water passes through, calcium and magnesium are removed. You can soften all your water with a water softener, provided you buy the type that matches your water use. The filter is automatically cleaned with salt that you have to top up occasionally.
What does the installation cost?
Installing a water softener is usually done by the same company where you buy the machine. If you have bought a second-hand machine or a new machine, you only pay the installation costs. You can also consider entering into a maintenance contract with the installation company. This often includes warranty and repairs. The following table shows the costs of installation and maintenance. For a new water softener, you can count on a one-time expense of between $ 1000 and $ 1500. The salt will cost you $ 50 to $ 100 annually, depending on your water use.
The return:
As soon as the water softener plant is on, you will start saving. This way you can use 50 percent fewer soap products. This applies to the washing machine and the dishwasher, but also to your own hygienic products. Devices that use water will last 30 percent longer because they will no longer be attacked by the elements. And clean devices use up to 20 percent less power to work properly. In general, you can get the costs of the water softener including installation out within 10 years, after which you start saving
The maintenance:
If you also enter into a maintenance contract with the installation company, you will no longer have to worry about your water softener. In this contract the warranty conditions will be described, you can have certain repairs carried out for free and they will come by every so often to refill the salt and to check the machine. However, you pay considerably for this and the question is whether you think it is worth it. You can only determine this by making a calculation and comparing the costs. You can also properly maintain the machine yourself. You have a water test for $ 10 so that you can test the hardness and the bacteria in the water. You can also clean, lubricate and top up the salt yourself. Repairs will sometimes be difficult and if you do not have a guarantee they can be expensive.
Keep the costs low:
This investment will, therefore, give you many benefits. And the best and most environmentally friendly way to get rid of lime and hard water is to install a water softener. Here you can read how you can keep these costs under control.
Do it yourself :
you can avoid installation costs by installing the water softener yourself. This is easy to do for an experienced handyman. Make sure, of course, that you are well prepared and that you know what you are starting. And check whether you still have a warranty on your device.
Second-hand :
by regularly monitoring the online market places, you can also pick up a good second-hand machine. This is often at a fraction of the price. Again, maintenance and warranty do not belong to the package.
Choose a local installation company :
you can also save costs on installation by hiring a local contractor. You will then hardly have to pay any call-out charges.
For further information click here: Ro Plant Price in Pakistan
Comments